A Beginner’s Guide to the Synology Router Port Forwarding!
Usually, port forwarding is an optimal solution for allowing externally connected devices to access and use computer services on a local network. You can forward network packets via multiple ports on any router, including Synology. However, to perform Synology router port forwarding, you must set/create some specific rules to transmit network packets.
Therefore, we present this guide immediately to teach you the detailed port forwarding process on the Synology router. Here, you will find the detailed process to configure Synology router port forwarding easily. Moreover, you will find other relevant insights regarding the port forwarding process in this guide. So, let’s have a closer look at this guide!
Key Requirements For the Synology Router Port Forwarding
When you begin the port forwarding Synology router, you should have some essential things with you. Here are some of the key requirements for this procedure:
- A Synology Router
- Strong internet connection
- Accurate Web/IP address
- Valid administrative credentials
- SRM access
- Computer
- Ethernet cables, etc.
How to Port Forward on Synology Router?
This is to say that you are now familiar with the essential things required to port forward the Synology router easily. However, you need to opt for a suitable method to accomplish this process smoothly. Therefore, this section outlines the detailed steps to configure Synology router port forwarding, as given below:
Port Forward the Synology Router Procedure Via the Web Portal
- To begin with, confirm that your Synology router is turned on.
- Then, connect your computer or smartphone to the router’s network.
- Now, open any web browser and mention the 192.168.1.1.8000 private IP address of the Synology router.
- Instead, you can use the router.synology.com web address in the URL bar.
- After that, use your valid username and password to access the SRM (Synology router manager) dashboard.
- From the SRM dashboard, go to Network Center>Port Forwarding and visit the Port Forwarding page.
- Now, click ‘Create’ to open a setup window.
- Hereon, mention the Name, Private IP address, Public Port, Private Port, and Protocol (TCP/UDP).
- After that, click on the ‘Create’ button to complete these settings.
- Further, follow the on-screen instructions to set up the port triggering rules on the Synology router.
- At last, you are done with the port forwarding Synology router process.
How to Accomplish the Synology NAS Router Port Forwarding?
Likewise the Synology router, you can also port forward on the Synology NAS within your local network. However, if you have a Synology NAS and want to configure the Synology router port forwarding on the local network, then you require multiple port forwarding rules. If you don’t know how to port forward the Synology NAS, then stay tuned for the detailed steps:
- Initially, access the SRM dashboard using valid Synology login details.
- Further, navigate to the SRM dashboard and go to the Network Center.
- Now, go to the Local Network>General and choose the ‘Enabled’ option from the ‘Enable UPnP’ drop-down list.
- Go back to the Network Center and tap on ‘Port Forwarding’ from the left-hand side menu bar.
- Hereon, the Port Forwarding tab opens.
- From this tab, click on the ‘Create’ option to create the port forwarding rules for your NAS.
- Fill in the required details in the corresponding fields on a pop-up window and hit the ‘Create’ button.
- Finally, click on ‘Save’ to apply these settings.
- With this, the port forward on Synology router process finishes here
Note: You can also set up port forwarding for multiple Synology NASs to facilitate external access within the local network. To do so, you need to create port forwarding rules for each NAS.
Hopefully, you have understood the entire procedure through our simplified guide. But, if you need any human assistance, use our Chatbox!