A Beginner’s Guide To Synology Router Setup​

The Synology routers are the highest-performing networking devices with advanced wifi technology. These efficiently remove the dead spots and provide you with lag-free surfing. In addition to using these routers completely, Synology Router Setup is a must. Therefore, we share a brief guide with you to help you understand the router configuration​ using different methods. For elaborative information, keep reading this post!

Essential instructions for Synology Router Setup

Moreover, there are three methods to configure your networking device, i.e., web GUI, app, and the Quick ID. However, before starting the Synology manual router setup procedure, ensure you have a stable network, web/IP address, SRM software installed, DS Router app, valid admin details, etc. After that, follow the steps mentioned below:

Quick Connect

  • Initially, connect your personal computer to the Synology router’s network.
  • Now, ensure you have SRM software installed on your computer.
  • Next, enable the QuickConnect option first.
  • To do so, click on the Network Center> Internet>Quick Connect & DDNS (Toggle the switch to enable this option).
  • Log in to your existing Synology account by entering valid information.
  • After that, create your Quick Connect ID by editing the Quick Connect ID section and typing accurate information.
  • If you already use the Quick Connect ID, then enter quickconnect.to/example (mention your ID name).
  • Next, visit Advanced and choose a specific package to enable or disable the Quick Connect option.
  • Afterward, click on Apply and follow further guidelines to complete the Synology router setup.
  • Finally, you are now able to configure the settings, manage, and control your router network remotely using this ID.

Web Portal

  • Primarily, link your Windows system to the Synology gateway network using an Ethernet cable or directly to the internet.
  • Afterward, launch the URL bar on your computer and type in router.synology.com or 192.168.1.1 IP address in the browser bar.
  • Hereon, enter an accurate username and password on the login window that appears to you.
  • Click on Start and activate the SRM Setup Wizard software.
  • Now, enter the valid information to start this software for Synology Router Setup.
  • If you have not installed the software, then download it first and create a new user account.
  • After logging in, select the Operation Mode and tap on Wireless Router.

Advanced Synology manual router setup

  • Next, choose the Connection Type, like Manual/Automatic IP, PPPoE, DS Lite, etc. 
  • Hereon, the router will start completing the Synology router setup. 
  • Afterward, select Start Managing Now, and you are shown to “Add WiFi Points” if you want to add multiple network units.
  • Further, visit the Advanced Settings and configure additional settings, such as WiFi Connect, Guest Mode, Manage Client Devices, etc.
  • Follow the on-screen instructions to complete the particular settings.
  • At last, click on Apply to implement the settings you made recently.
  • Now, Synology Router Setup ends​ successfully.

DS Router app

  • Firstly, use an updated version of the DS router application on your smartphone. 
  • Afterward, run the app and access the admin account using the valid admin credentials.
  • You are now asked to set a new wifi name (SSID) and password for your Synology router.
  • After logging in, you visit the Synology NAS router setup dashboard.
  • Here, choose the Operation Mode as Wireless Router.
  • Further, select the Connection Type: Auto IP, PPPoE, Manual IP, etc.

Join the local network

  • You are prompted as “DS Router wants to join wifi network Synology?”
  • Click on this option, and this will take a few seconds, so wait patiently.
  • Here, a new screen appears to you as: Manage your Synology Router anywhere, and click on Setup at the bottom of the screen.
  • You are asked to set up a Quick Connect ID to manage your router remotely.
  • Enter the Synology admin account details, or you can fill in the information if you want to keep the credentials different for both.
  • Now, click on the Sign-Up button after filling out the required information.
  • You now see a new router Home screen. 
  • Here, click on the top left corner (three bars) to explore the additional settings.
  • After that, follow the in-app guidelines to configure further settings.
  • Finally, tap on Apply/Save to secure the customized settings.
  • Your Synology NAS router setup procedure ends successfully.

Final Words

In the end, this detailed guide provides you with deep insights into Synology router setup. You find three different methods with elaborate steps to customize, manage, and control your networking device. Have more queries? Reach out to our tech experts!

Scroll to Top